Have you been offered thermography for your photovoltaic system? Before agreeing, ask what question the inspection will answer and what report you will receive. A useful inspection should help you decide which area needs further investigation, how urgently, and by which technician.
What thermography examines
Infrared thermography captures a thermal image of the equipment. In photovoltaic systems, it is used to identify thermal anomalies during operation. The technical specification IEC TS 62446-3:2017 describes requirements for measurement equipment, environmental conditions, procedures, reporting, and personnel qualifications. IEC documentation for outdoor thermography of photovoltaic systems.
If you see a hot area in the image, ask the inspector to explain what it means and what additional check would confirm it. The location, capture conditions, and operating status of the system should accompany the finding so that it can be technically assessed.
When it is worth discussing this inspection
Start with the symptom you want to investigate. There may be a persistent, unexplained drop in production, a difference between groups of panels, or an observation from a previous visit. Give the technician the system’s service history and describe when the deviation occurs. Ask them to explain whether thermography would provide useful information in this particular case.
You can also discuss it as part of an organized handover or preventive inspection. Agree in advance on the scope of the inspection and the deliverable. For the overall handover process, read what to check when accepting your photovoltaic system.
Ask how the inspection date will be chosen
Solar irradiance and its stability affect the conditions for a thermographic measurement. IEA PVPS guidance describes the need for suitable irradiance conditions and for recording them during the inspection. Ask how the suitability of the day will be assessed and what will happen if the weather changes. IEA PVPS operation and maintenance guidelines.
If the appointment can only take place at a specific time, let the inspector know in advance. Ask whether that time allows for the planned inspection and what limitations will be noted in the report. Simply having a thermal camera at the property leaves these questions unanswered.
What to ask for in the report
Agree to receive a document that you can link to your own system and use during the next technical visit.
- Inspection identity and scope. Which property and sections were inspected, when, and by whom.
- Measurement conditions. How the system was operating, what equipment was used, and which conditions or limitations affected the capture.
- Location of each finding. A thermal image together with a regular photograph or a clear indication of the location on the plan.
- Technical assessment. What was observed, what explanation is being considered, and what needs to be confirmed.
- Next steps. Who will investigate, how urgent it is, and how the repair will be confirmed.
An illustrative example of how to read a report
Suppose the report shows a thermal difference on one panel and recommends a follow-up inspection. Ask for that specific panel to be marked on the plan, for the capture conditions to be described, and for the next steps to be explained. This will help you coordinate with the service team and compare the results after the work is done. This is a hypothetical example and does not describe a project or diagnosis involving one of our customers.
Keep the report with the system’s service history
Save the images, technical report, and communications about the agreed actions. If a warranty issue arises, ask for clarification about what additional information the manufacturer of the specific equipment requires. You can prepare with our guide to panel, inverter, and installation warranties.
Leave roof access and any electrical measurements to the appropriate service team. Do not open electrical panels or connections, and do not attempt to touch any area that appears hot in the image.
If you are investigating low production, contact Solar Home with your system’s service history and any existing inspection report. We will discuss what information is needed to assess your installation.